66 tooth wizard... not working?

[stunned monkey]

The latest version of Wari I've just downloaded seems to miscalculate the teeth angles when given a 66 tooth per crank, one missing tooth per period, 6 cylinders.

The teeth angles drop out at an even 5 degrees.

I can start with a config written on an older WARI (which displays the correct multiples of 5.75 degrees rounded up to the nearest degree) and if I run the wizard, it' re-writes all the values (and they go waaay out).

Am I missing something?

Martin

[Mitch]

Hi Martin,
You can download a corrected beta version of the software here

http://www.adaptronic.com.au/forum/index.php?topic=480.15

Mitch

[stunned monkey]

Nice one, Mitch. When I said "rounded up", I actually meant "rounded to the nearest...", it now displays every figure rounded UP to the nearest whole number - presumably this is just a display thing and doesn't affect the underlying figures?

[rob_k]

presumably this is just a display thing and doesn't affect the underlying figures?

That is correct, the ECU stores the values much more accurately, and the software just rounds off the values for display.

Cheers
Rob